Articles

• Analysis of the vibration caused by porting on the intake and exhaust channels of a 150 cc Kawasaki Ninja driver

  Eko Saputra Eko Saputra, Subekti Subekti, Tulus Supriyanto

  1-10

  https://doi.org/10.37373/jttm.v4i1.359
  Abstract View: 701, pdf Download: 1049

  • pdf
• Pengaruh porting saluran intake dan exhaust terhadap kinerja kawasaki ninja 2 tak 150 cc

  Hendro Hendro Prastyo, Tulus Supriyanto, Subekti Subekti

  11-17

  https://doi.org/10.37373/jttm.v4i1.357
  Abstract View: 441, pdf Download: 2842

  • pdf
• Optimasi konsumsi bahan bakar pada mesin bensin menggunakan artificial neural network

  Agung Nugroho, Mochamad Anugrah Tri Nurhasan; Rony Wijanarko, Darmanto

  18-27

  https://doi.org/10.37373/jttm.v4i1.354
  Abstract View: 443, pdf Download: 503

  • pdf
• Analisis parameter proses pembubutan terhadap kekasaran permukaan baja ST 37 menggunakan metode taguchi

  Wildan Wildan, Anis Siti Nurrohkayati

  28-35

  https://doi.org/10.37373/jttm.v4i1.376
  Abstract View: 376, pdf Download: 499

  • pdf
• Rancang bangun sistem penyortir dan penghitung lele sangkal berbasis IoT

  Lamhot Fernando Remember Simanjuntak, Marno, Rizal Hanifi

  36-46

  https://doi.org/10.37373/jttm.v4i1.355
  Abstract View: 829, pdf Download: 796

  • pdf
• Analisis kegagalan pada blade turbin PLTU 400 MW

  Win Hendrawan; Meilinda Nurbanasari

  47-54

  https://doi.org/10.37373/jttm.v4i1.433
  Abstract View: 532, pdf Download: 770

  • pdf
• The analysis of carburizing with15, 30, 40,45,60 minutes holding time due to hardness and microstructure on ST 60 Steel

  Pramuko Ilmu Purboputro, Sartono Putro, Djoeli Satrijo

  55-63

  https://doi.org/10.37373/jttm.v4i1.448
  Abstract View: 286, pdf Download: 563

  • pdf
• Kajian sistem pendingin udara ditinjau dari kerusakan evaporator pada kendaraan ringan merk ‘x’

  Srihanto, Parman Sinaga, Sigit Yulianto, Ricky Perdana Handono

  64-74

  https://doi.org/10.37373/jttm.v4i1.451
  Abstract View: 378, pdf Download: 642

  • pdf
• Analisis alat uji mekanika fluida pada laboratorium ITBU sebelum dan sesudah rekondisi penambahan alat ukur

  Moch Sugiri, Victor Eka Setiawan

  75-82

  https://doi.org/10.37373/jttm.v4i1.478
  Abstract View: 657, pdf Download: 757

  • pdf
• Pengaruh pengaturan voltase terhadap kekuatan tarik pada gas metal arc welding antara pipa STKM 13B dan pelat SPH 440

  Juliyanto Simamora, Adhes Gamayel, Ida Bagus Indra, Mohamad Zaenudin

  83-89

  https://doi.org/10.37373/jttm.v4i1.470
  Abstract View: 344, pdf Download: 273

  • pdf
• Rancang bangun mesin pengempa briket arang kelapa Dengan metode ulir tekan

  Ispari Wahyudi, Edilla, Luqman Hakim, Amnur Akhyan

  90-100

  https://doi.org/10.37373/jttm.v4i1.544
  Abstract View: 878, pdf Download: 895

  • pdf
• Analysis of the corrosion rate and remaining life of the B3 waste transport roll-off tank composed of 316L stainless steel

  Iwung Hari Retno, Wilarso, Che Wan Mohd Noor

  101-107

  https://doi.org/10.37373/jttm.v4i1.551
  Abstract View: 137, pdf Download: 144

  • pdf
• Perancangan transmisi roda gigi screw extruder

  Hilman Sholih, Beni Mei Kristanto, Aswin Domodite

  108-118

  https://doi.org/10.37373/jttm.v4i1.550
  Abstract View: 439, pdf Download: 611

  • pdf
• Solar energy utilization in desalination power plan

  Erdiansyah, Kristyadi Tarsisius, Diki Ismail Permana

  119-126

  https://doi.org/10.37373/jttm.v4i1.527
  Abstract View: 175, pdf Download: 163

  • pdf